General Specifications of MXVR

Phase   3 phase / 4 wire
Capacity   Refer to the table on page 6
Applicable Rated Voltage   380V,400V,415V,440V
Output Voltage Setting
       Manual   2%,0%,-2%,-4%,-6%
       Automatic   Rated Voltage x〔1.00,0.99,0.98,0.97,0.96〕
Frequency   50/60Hz

Efficiency   99.5% or better

Insulation Resistance   50Ω and over at 500 megger
Dielectric Withstanding Voltage(tested value)
                AC2KV for 1 minute except for semi-conductor circuit and controller

Atmospheric Temperature   -10 to 40 degrees Celsius
                                                  (24 hour average:below 35 degrees)
Relative Humidity   45 to 85%
Cooling Method   Natural air cool(no due)

Protection Degree
       In Door   IP 20
            (A solid substance with diameter of 12.5mm and over does not enter.)
      Out Door   IP 21W
            (In additon to above, a perpendicular water drop does not permeate.)

Change Over during Transmission   Allowed
Transformer Insulation Grade   Class H
Applicable Standard   JEM 1265
                         (Low Voltage Steel Sealed Type Switch Gear and Control Gear)

Specifications are subject to design changes without prior notice.

CAUTION !

  1. MXVR can be also available for out door installation.
  2. Saving may not be expected much where inverters are installed.

Please carefully read Operation Manual for your safety.